Skip to content

C296 > Connect the Zosi C296 Camera to the Zosi POE/NVR System

Can I Connect the Zosi C296 Camera to the Zosi POE/NVR System 

 

NOTE: If the device is not added successfully, please reset the device by pressing the

device reset button for 5 seconds, and then add device again according to the above

steps.

2) If your app successfully adds a camera to the same home network, it can be directly mapped on the nvr, if it can't be mapped, it can be operated like this:

 

Step 1:Enter Poe/NVR's IPC Channel Config to click "Search" to find the camera.

ipc.png

 

 

ipc_chazhao.png

 

Step 2 After you find the camera, please click "Add all" to add the camera.

And it will be added to the POE/NVR successfully.

ipc_add.png

 

Finally you can view your cameras on this monitor.

 

Method 2:  Wired Connection

1) Connect the wireless camera with power adapter(12V-1A). Make sure your C296 camera and zosi NVR system are connected to the same Router through Lan cables, so the two devices will be in the same network.

 

2) If this camera is conenctted to the same network , it can be directly mapped on the nvr, if it can't be mapped, it can be operated like this:

 

Step 1 Enter NVR's IPC Channel Config to click "Search" to find the camera.

ipc.pngipc_chazhao.png

Step 2 After you find the camera, please click "Add all" to add the camera.

And it will be added to the NVR successfully.

ipc_add.png

 

 

 

Support Email: service@zositech.com
 
 
 
Whatsapp:+1-866-841-6932
 
UK Whatsapp:  +86 18675610962
 
Zosi Smart APP:

Related Articles